TropiClear Quick Dissolving Shock
- For use in vinyl and concrete pools
- Sanitizes pool water
- Kills algae
- Eliminates bacteria and organic contaminants
- Protects against odor
- Dissolves quickly with no residue
Additional information
Packaging | Pouch |
---|---|
SKU | TC-6001-1 |
Weight | 1 lb |
Active Ingredients | Sodium Dichloro-S-Triazinetrione Dihydrate- 99%, Other Ingredients- 1%, Available Chlorine- 55.5% |
Directions
DIRECTIONS FOR USE: It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. This product is designed to dissolve quickly and completely providing a steady source of available chlorine in swimming pools to control the growth of algae, kill bacteria and destroy organic contaminants.
READ THE PRECAUTIONARY STATEMENTS BEFORE USE.
METHOD OF APPLICATION: Broadcast the product evenly over a wide area in the deepest part of the pool with water circulating.
SHOCK TREATMENT: Adjust pH to 7.2 to 7.4 with pH increaser or pH decreaser. Follow label directions.
For Start-Up Initial Shocking: With pump running and pool not in use, broadcast 1 pound of this product per 10,000 gallons of water directly into the deep end of the pool. To prevent possible damage to pool surface, use a pool brush to disperse any granules that may have settled at the bottom of the pool. Repeat procedure after 24 hours, if needed, to establish a chlorine residual of 2-4 ppm as determined by a test kit.
For Routine Shocking: Every two weeks with pump running and pool not in use, broadcast 1 pound of this product per 10,000 gallons of water directly into the deep end of the pool. To prevent possible damage to pool surface, use a pool brush to disperse any granules that may have settled at the bottom of the pool.
Re-entry into treated pools is prohibited above levels of 3 ppm chlorine.